Weston Climate Airdot Heat Recovery Ventilation Unit

WESTON-AW-LC-AIRDOT-60

THE FIRST PERFECT DUCTLESS VENTILATION SYSTEM IN EUROPE! EASY AND QUICK INSTALLATION.

Airdot is a heat recovery ventilation unit that exhausts stale air and brings fresh air into the room. Heat recovery helps reduce the heat loss associated with air exchange.
One hole in the external wall is sufficient for installation, and a separate ventilation ductwork is not required. Airdot is suitable for apartments, private houses, and buildings under renovation where the installation of central ventilation is complicated or unnecessary.

  • Returns up to 97% of heat, which reduces heating costs
  • Works alone, wirelessly as a pair, or in a group of up to 10 devices
  • Quiet (32.7 dB(A)), suitable also for the bedroom
  • Helps to automatically keep CO₂ or humidity levels within normal limits (depending on the model)
  • Control via remote or Wi-Fi app, supports Alexa and Google Assistant
  • 7-year manufacturer warranty

White models are in stock, delivery is 3-4 days.

WESTON-AW-LC-AIRDOT-60-CO2-B (Must/CO2) EPREL register
WESTON-AW-LC-AIRDOT-60-HM-W (White/Moisture) EPREL register
WESTON-AW-LC-AIRDOT-60-CO2-W (White/CO2) EPREL register
WESTON-AW-LC-AIRDOT-60-HM-B (Moisture/humidity) EPREL register

Hinnavahemik: 338 € kuni 843 € (inc. tax)

Weston Climate Airdot – Single-room heat recovery ventilation unit

In today's well-insulated and airtight homes, air does not circulate on its own. The result is stuffy air, high CO₂ levels, excess moisture, and the risk of mold. While an open window brings in fresh air, it also lets out heat. The Weston Climate Airdot heat recovery ventilation unit solves this: stale air is exhausted and fresh, filtered air enters the room, but most of the heat stays inside.

How it works

The device switches between air extraction and supply every 75 seconds. The outgoing indoor air passes through a ceramic regenerator, which stores its heat and moisture. When the airflow reverses, the incoming fresh air absorbs the stored energy and enters the room pre-heated rather than cold. In summer, the same process helps keep the cool air inside. Compared to a standard exhaust fan, the energy savings can be over 30%.

Who is it for

Airdot is suitable for apartments, private houses, offices, and other spaces where fresh air is needed, but installing duct ventilation is complicated or expensive.

How many devices are needed?

One device also works independently, but the best result is given by a pair of devices: when one device blows fresh air in, the other simultaneously draws used air out, which ensures continuous and balanced ventilation. The devices connect wirelessly with each other, the recommended distance between them is 8–15 m. In a larger apartment or house, the devices can be grouped in sets of up to 10.

Key features

  • Three operating modes: heat recovery, supply only, or exhaust only
  • Ceramic regenerator with antibacterial treatment
  • Reversible 3-speed brushless EC fan with overheating protection and ball bearings for a long service life
  • Pre-filter and F7 (MERV11) filter as standard equipment
  • Automatic closer prevents retraction
  • Free cooling: when the outdoor temperature is within ±1 °C of the set comfort temperature, the unit blows in fresh air without heat recovery
  • Smart indoor air control: A CO₂ sensor (CO2 models) or humidity sensor (humidity models) automatically increases the fresh air supply when needed.
  • Elegant decorative front panel with magnetic attachment
  • Ice and condensation free

Easy control

  • Buttons on the device and the included remote control
  • Wi-Fi app for Android and iOS: operating mode, fan speed, timer, weekly schedule, CO₂ reading (on CO2 models), filter reminder, scenarios and group control, from anywhere in the world
  • Supports Alexa and Google Assistant (via the Smart Life app)

Easy installation

It is installed in the external wall through a single Ø170 mm opening, no separate ductwork is required. The telescopic duct is suitable for walls 280–470 mm thick (an extension tube up to 600 mm is available for thicker walls). Magnetic front panel. It connects to a standard electrical outlet. The recommended installation height is above 2.1 m from the floor.

We also offer standard installation: wall thickness up to 300 mm, wall material Fibo (expanded clay block) or wood frame.

Technical data

  • Voltage: 100–240 V AC, 50/60 Hz
  • Power: 6 / 7 / 7.8 W
  • Current: 0.04 / 0.05 / 0.06 A
  • Airflow with F7 filter: 20 / 40 / 50 m³/h (in boost mode 60 m³/h)
  • Sound pressure level: 32.7 dB(A) (according to manufacturer)
  • Heat recovery: up to 97%
  • Energy efficiency class and EU energy label data: see EPREL link for each model
  • Degree of protection: IPX4, electrical protection class II
  • Number of revolutions (max): 2200
  • Duct diameter: 158 mm (wall opening Ø170 mm)
  • Wall thickness: 280–470 mm
  • Product dimensions: 239.6 × 258 × 499.7 mm
  • Net weight: 4.2 kg

Included in the set

Ventilation unit, installation accessories (including PU glue and silicone sealant), remote control, user manual.

Maintenance

Filters and the ceramic regenerator come out of the device easily. It is recommended to clean the regenerator 4 times a year (rinsing with water) and the fan once a year. The F7 filter must be replaced regularly; spare filters can be ordered from us.

Additional information

Weight 4,2 kg
Dimensions 0,24 × 0,26 × 0,50 m
Guarantee

7 years

Manufacturer

Weston Climate

Recommended surface area (m2)

1-60

Recommended volume (m3)

1-160

Color

Black, White

Model

With CO2 sensor, With humidity sensor

Standard installation

Yes, no

×

Ask for a quote